 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore ultrawash control panel won't reset and no heat dry button keeps blinking
Some of the buttons on the control panel won't light up at all. If I press normal wash the no heat dry button lights up with it and then I can't press start. No matter what I push (other than drain/cancel) the no heat dry/lock button is on. I've tried unlocking it, turning off the breaker, pushing the sequence normal wash/no heat dry repeatedly. Nothing is working and I NEED my dishwasher. Any clue what to do?? Sometimes if I leave the door open for a week or two it resets.. but only once and then fails again.:confused:
|
||||
Check out some similar questions!
Hi, I have a rental property with the above described hot water heater and have had some trouble determining exactly what my problem is. Here is a breakdown of what I've experienced. Hot water line burst just above the top of the tank and ran for a period of days spewing hot and eventually cold...
I need to reset my dishwasher, model 665, the clean light keeps blinking, and I have called them before and I lost the easy steps to reset the washer, please help Thank you
I have a 665.15784300 ultrawash dishwasher that won't run. The quick rinse button keeps flashing. The only thing that stops it is the high temp scrub button. Then it flashes back and forth between washing status and the quick rinse again. I have tried the air dry and hi temp scrub reset theory, but...
?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
