Ask Experts Questions for FREE Help !
Ask
    jimimajor's Avatar
    jimimajor Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 2, 2009, 08:17 PM
    Amperage rating for wire
    What is the amperage rating for number 6 and 8 wire
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Aug 2, 2009, 08:35 PM
    It depends.

    What type of wire and what is the application?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wire Gauge and Amperage [ 8 Answers ]

If the wire gauge to a machine is changed, will the voltage/amperage to the machine automatically change? Or does it matter what the machine actually uses? In my case, the amperage was already much lower than the original wire gauge, but now the wire gauge will match better with the actual...

Circuit Breaker Amperage Rating [ 3 Answers ]

Am I correct in assuming that a circuit is given a breaker based on the gauge of the wire installed? e.g. 15 amp circuit has 14 gauge, 20 amp 12 gauge etc. By way of follow up, therefore if the load on a 15 amp circuit keeps tripping the breaker then either the circuit must be split up or the...

Entrance Panel Amperage Rating [ 1 Answers ]

I just bought an older condo. The service panel in the unit does not contain the main breaker. It is located in a meter room outside. The main breaker there appears to be 125 amps (I'm assuming 220). I would like to install a combo gas/electric oven stove. There is no 220 big amperage service...

Electrical outlet rating vs. Circuit breaker amperage rating [ 5 Answers ]

Hello to all, I am new to this forum, please excuse me if this question has been answered. I just bought a Thermal Dynamics Plasma cutter. It has a Nema 50-P plug end on it, which I assume is to be plugged into a Nema 50-R outlet. In looking in my reference book, this is a 3 wire...

Remote amperage rating for Ellington WC-100 [ 1 Answers ]

I recently bought a ceiling fan and have been told by the ceiling fan company to use a remote made by Emerson called an SW-101 wall unit, that is rated at 1.25 amps. Doing a bit of research, I found an Ellington WC-100 that appears to be exactly like the SW-101. Does anyone know if this unit...


View more questions Search