 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Have a multi-stage heat pump and this thermostat is one of the 3 located upstairs (there is one downstairs). Wiring on T8001r was Green = G Blue = C Yellow = Y Red = R White = W1 There were no other wires hooked up and no jumpers.
I am replacing a White-Rodgers nonprogammable thermostat with a Honeywell RTH7500 programmable thermostat. This is the wiring config on the old thermostat. By the way I have a heat pump with emergency heat. B = Blue wire Y = Yellow wire G = Green wire R = Red wire W = White wire C = Brown...
Hello, I am trying to install a new Honeywell RTH7500 thermostat to replace my Robertshaw 9200 thermostat. The Robertshaw 9200 had the following connections: One yellow wire that was connected to W and Y (the wire is long and was threaded underneath the screws in the W and Y connections);...
I am replacing my old thermostat a Trane BAYSTAT240A with a honeywell RTH7500 series one. There were eight wires on my old W- B- X2-Y-G-O-R-and a T. There is no spot to hook up the T wire although I got the unit to work. Right now the biggest problem is I can't read the display good because the...
I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
