Ask Experts Questions for FREE Help !
Ask
    bobeynon's Avatar
    bobeynon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2009, 12:11 PM
    Fan works but lights won't
    I have a celling fan in my kitchen I installed it myself. I took it down from previous home we had and put in in our new home.I had wired it up the same way I'm sure of but the fan is the only thing that comes on. Lights won't work although they did at the other house. Is there something maybe I did wrong my hands are tyed.any help would be thankfull.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 5, 2009, 12:40 PM

    Obviously you didn't wire it the way it was previously wired or it would work. Untie you hands and tell us how you wired it.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jul 21, 2009, 01:40 AM

    What wires do you have from fan and from the ceiling?

    Ceiling fan wiring - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace won't light and the lights on my control module won't come on [ 2 Answers ]

Ok a couple of question if you can help I have a comfortmaker furnace I believe 1999 it came on a couple of times after I bought a new transformer, board, capacitator, and ignition control module now it won't come back on What to Do! Also I wanted to know if you can tell me the difference between...

Hampton bay fan works no lights? [ 1 Answers ]

I just installed a Hampton Bay with light kit and no remote. I connected white to white, black to black, blue from fan to red from house. Fan has pull chains for fan and lights. Light is also controlled by wall switch. Light work for 2 minutes but stopped after that. The fan still works. I...

Ceiling fan works, only 1 of 3 lights work [ 6 Answers ]

I just installed the Harbor Breeze Vector Elite, which is a pullchain fan. I installed a Harbor Breeze remote to it as well. The fan controls work fine, but only one of the lights is working. It will dim and everything, but the other 2 won't come on. What up?

Harbor breeze fan works but lights don't [ 2 Answers ]

I just installed a harbor breeze fan and light kit, I just wanted to know how to wire it up if I have a white/black/and copper wire from ceiling and black/blue/white/and two green wires from the kit... Do you wire the blue and black from kit to black in ceiling, white to white in ceiling and greens...

Hampton Bay CF: fan works, lights don't [ 3 Answers ]

I hung a hampton bay ceiling fan (Huntington III), controlled by a simple single light switch, and the fan works well, but the lights do not work at all. I wired white to white, black to black, green and blue to outlet box ground. I am guessing that it's a manufacturer's defect, since it is getting...

View more questions Search