Ask Experts Questions for FREE Help !
Ask
    Lewis Christian's Avatar
    Lewis Christian Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2009, 07:53 AM
    Engine stops when I put in gear or let down blades

    Hello I own a craftmen DTL 3000 mower , engine stops when I put in gear or let down blades , but run fine in neutral until I let off the brake clutch.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 22, 2009, 11:57 AM

    There are at least 3 safety switches on that mower and the seat switch usually goes first. Tell me the actual model number staring with 917. And I'll get you a manual download so you can see all 3 switches.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman riding mower engine stops when blades are engaged [ 15 Answers ]

I have a Craftsman 'Garden Tractor', model number: 917.273070. It has a Kohler engine (model number: CV22S, type number: 75534). The engine starts fine and will run without any issues in all gears. However, immediately once I engage the blade clutch the engine begins to stall. If I place the...

Engine stops when I put in gear or let down blades [ 1 Answers ]

<post moved to its own thread> Check safety switches, particularly the seat switch.

Troy-Bilt Lawn Tractor stops moving, engine/blades still on. [ 1 Answers ]

I have a Troy-Bilt Pony, 17.5hp, 8-Speed, 42" Lawn Tractor. At start of the season, started mowing and after approx. 45 minutes, the mower just stopped moving. I disengaged the blades, tried to change speed, direction, and every time I released the clutch/brake pedal, the engine pulley would...

Blades won't engage in high gear. [ 4 Answers ]

I have a 2001 Troybilt tractor, 23hp with a 50" cut. It runs great and blades engage and cut in low gear. However when in high gear the blades disengage. Anybody got any idea on what could be the problem? Email me please @ [email protected]. Thanks

View more questions Search