Ask Experts Questions for FREE Help !
Ask
    ranger walker's Avatar
    ranger walker Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2006, 04:58 PM
    Removing a hampton bay fan
    Iam trying to remove a home owner installed hampton bay ceiling fan and cannot figure out how to remove the housing that conceals the ceiling mounting bracket. Normally there are screws that when loosened the housing can be removed exposing the wiring, mounting bracket, and outlet box. This unit has no screws, but there appears to be some kind of locking ring holding it in place and I cannot figure out how to remove it.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 15, 2006, 10:37 PM
    The locking ring simply covers the screws. Twist it and pull off and you will have access to the screws.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

REMOVING a Hampton Bay ceiling fan [ 13 Answers ]

I'm a newbie to this site so forgive me if I posted in the wrong area. I'm the process of replacing one Hampton Bay ceiling fan with another. Easy enough job , right? Nope. I got as far as removing everything but the motor and the housing that is holding it. As I recall when putting it up...

Removing a hampton bay ceiling fan [ 3 Answers ]

I have a hampton bay ceiling fan, that I need to move to another room. The problem is I can't remember what we did to put it up, it doesn't have screws on the outside like all other fans. I'm sure it's probably something simple I'm overlooking. Can anyone help me please!

Removing blades on H. Bay fan [ 1 Answers ]

We've recently moved into a house with a Hampton Bay ceiling fan (model AC-527 NN) already installed in the kitchen. I think it's a fairly new model. Since we didn't buy, we don't have the instruction manual and the "king of fan" website isn't much help as rickj mentioned. We would like to...

View more questions Search