Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cantilever system for fluorescent lights
[ 2 Answers ]
Hi, I recently rented a large industrial space with 25 ft ceilings and poor lighting. I am trying to set up some lighting to make large artworks along one wall. I thought I would hang 8 foot long fluorescent strip light fixtures along that wall. The question is how to attach them. The...
Replacing a fluorescent light with recess lights
[ 4 Answers ]
I'm looking to replace my old ceiling fluorescent light with four recess lights. The current light is controlled by one switch and I'd like to control all four replacements lights with the same switch. Can you please advise me how to run the wires and how to connect them from one master switch...
Watt conversion on fluorescent lights
[ 2 Answers ]
Trying to confirm my thinking on the wattage conversion on fluorescent lights versus standard incandescent bulbs. Example - I have a 2-bulb porch light fixture that is rated for 60 watt bulbs (120 total). I have some fluorescent bulbs that pull 19 watts but are equivalent to a 75 watt...
Hanging Fluorescent lights
[ 3 Answers ]
I purchased (6) 4'x1' t8 fluorescent lights for an unfinished storage room. My questions is am I best installing these lights directly parallel to the floor joists, or perpendicular to the joists. In my particular application I would prefer to hang the lights parallel to the joists. My...
Fluorescent and incandescent recess lights
[ 1 Answers ]
I have 4 recess fluorescent lights controlled with 2 3-way switches. Can I add a incandescent recess light to this circuit? Thanks View more questions Search
|