Ask Experts Questions for FREE Help !
Ask
    nonadjustablemind's Avatar
    nonadjustablemind Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2006, 11:06 AM
    Hampton Celing Fan
    Hi I have a question, I just got a new hampton celieng fan.

    I tried to look for a service number and HA! None to be found, so I figured I could trust the guys here.

    I installed the fan and separate light kit, the lights work, and I can hear the fan motor working but the fan blades do not work


    They just sit there.

    Please help!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Sep 4, 2006, 10:27 PM
    What do you mean, you can hear the motor working? Is anything spinning inside?

    http://www.ceiling-fans-n-more.com/c...ng-and-FAQ.php
    nonadjustablemind's Avatar
    nonadjustablemind Posts: 12, Reputation: 1
    New Member
    		  
    #3

    Sep 5, 2006, 06:39 AM
    Yes I can hear it working, but no movement. I decided to just get a new one :D and see if we get better luck.

    That is kind of a bad way to start with a brand new fan lol

    Thank you for the link, I bookmarked it for future ref.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Sep 5, 2006, 09:53 AM
    Hopefully your new one was a Hunter and not a Hampton Bay.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Celing fan pull switch [ 8 Answers ]

I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it. I took and old single layer switch from another fan touched the black to each wire to find the speeds...

Painting an unfinished basement celing [ 3 Answers ]

Any advice on painting an unfinished basement ceiling. I did read the posts about spraying But what type of paint wshould be used to cover the wiring, ducts etc as well as the joists etc. Has anyone tried this apporach. It is popular in commercial spaces and I have seen it in a few basement...

Mounting a new celing fan [ 1 Answers ]

Hi I just moved into a new home and trying to mount a celing fan in the bedroom.The builder have already installed a wired mounting, so I had no problem mounting the fn, but wiring is another story! There are 3 outlets coming out of the wiring housing: First have 1 purple, 1 yellow and 1 white...

Wiring a Hampton Bay celing fan [ 1 Answers ]

I bought a Hampton Bay celing fan (with light) to replace a fan. The old fan was set up for one wall swittch to work the fan and the other to work the light. My house has a red, black, white and bare wire. The Hampton fan has a blue (marked light), black, white and green wire. The instruction...

3 wire celing fan switch [ 1 Answers ]

I have just bought a 3 wire celing fan switch and I can't figure out how to wire it. It is a 3 speed fan and it has what appears to be a transformer with blue and black wires going from the old switch to the transformer. One black wire is coming out of the transformer to the plug. The new switch...

View more questions Search