 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring a Hampton Bay celing fan
I bought a Hampton Bay celing fan (with light) to replace a fan. The old fan was set up for one wall swittch to work the fan and the other to work the light. My house has a red, black, white and bare wire. The Hampton fan has a blue (marked light), black, white and green wire. The instruction tell me to wire the Hampton fan as follows: white to white. Black and blue to black and green to the ground. However, when I do this, the fan and light work off the same switch. I tried doing the black to black, red to blue and white to white, but then only the light works,not the fan. As best I can tell, the fan and light are not wired to work off two switches (the light and fan are pre wired by the manufacture). Any ideas?
|
||||
|
||||
|
Wire black to black, white to white, green to bare, blue to red.
http://www.ceiling-fans-n-more.com/c...fan-wiring.php |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am trying to reinstall a Hampton Bay ceiling fan (Model 44F8). There are 4 wires in the ceiling; two of which are still connected. The fan itself has 3 wires... black and red (they are connected); red is the light and black is the motor; the single white wire is marked neutral. What do I...
Hi I have a question, I just got a new hampton celieng fan. I tried to look for a service number and HA! None to be found, so I figured I could trust the guys here. I installed the fan and separate light kit, the lights work, and I can hear the fan motor working but the fan blades do not work...
Hampton bay fan has white/black wires and green ground. Electrical box has white/black/and red and copper ground. What do I do with the red wire? Even though switch is turned off at wall, when I connected black to black the fan comes on and stays on! It does come with a remote.
Ok, so as I stated in a previous thread my Hampton Bay ceiling fan has the problem where the lights dim, go off, come on by themselves, or the fan turns on for no reason. The company said the model wasn't a remote model so the previous home owner installed the remote on it. I decided to...
I need some help with wiring a Hampton Bay Ceiling fan. The fan is multi-speed and has a light as well. This house was pre-wired for the ceiling fan and has a white, black, red & copper wire. There is a separate switch for the fan and the light that are both right next to each other. The...
View more questions Search
|
