Ask Experts Questions for FREE Help !
Ask
    jeff suttle's Avatar
    jeff suttle Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Mar 22, 2009, 04:06 AM
    Well pump not working
    Well pump not working
    csavage1's Avatar
    csavage1 Posts: 86, Reputation: 5
    Junior Member
    		  
    #2

    Mar 22, 2009, 07:36 AM

    What is the type of pump you have?
    Deepwell = 2 pipes to the well.
    Shallowwell =1 pipe.
    Submersible is the pump in the well.

    Size of pump,model,make,voltage,pressure switch,control box if it is a submersible.

    You need to give as much info on the type of pump you have and a picture would help.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Mar 22, 2009, 01:25 PM

    1. Make sure breaker is not thrown.
    2. If breaker is on, then make sure contact points in switch are together.

    Get back after you do those two things.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Well Pump Not Working [ 1 Answers ]

We had a hose leak in our shower and cut off the water pump at the breaker to repair the hose. When we turned the breaker on our water pump for our well will not cut back on. Any suggestions on what to do?

Well pump not working [ 1 Answers ]

My pump is not working. The logo on the storage tank is WELL X TROL. I have read about priming the pump but I can't figure out how to do that on my system. Please Help.

How to tell if circulating pump is working [ 2 Answers ]

I have and older Furnace with Hot water Cast Iron radiators (2 floor, 1300 sq ft house). Had to turn on furnace for first time over weekend and it took about 50 min to get the temp from 63 up to 66. The radiators heat unevenly and I was listening for the circulating pump to go on so I could bleed...

View more questions Search