Ask Experts Questions for FREE Help !
Ask
    p thomas's Avatar
    p thomas Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 15, 2008, 03:12 PM
    Wiring in a new honeywell t4360 frost stat
    Can anyone tell me how to wire up this new frost stat
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Feb 16, 2008, 05:55 AM
    Moved from Electrical to HVAC.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Feb 16, 2008, 06:45 AM
    Se if this looks like yours. If so here is a wiring diagram.



    http://customer.honeywell.com/techli...0s/69-1604.pdf
    ntadmin's Avatar
    ntadmin Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Feb 11, 2009, 04:06 AM
    Quote Originally Posted by p thomas View Post
    Can anyone tell me how to wire up this new frost stat
    Honeywell provide a reasonable quantity of information at:

    http://www.honeywelluk.com/default.aspx

    If you register, it will allow you to download pdfs. Registration allows you to specify what type of person you are. Needless to say, 'installers' can access some information in a way that 'end users' cannot.

    Hope this helps,

    Neil
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a rth7400 honeywell Heatpump t-stat [ 2 Answers ]

I am at my witts end with trying to wire this T-stat I am removing an old honeywell heatpump M# T874D1165 and replacing it with an RTH7400 programmable I have 7 wires running out of wall, here's what I have, BROWN and WHITE hooked to W-2 (with jumper going to Y-2) YELLOW going to...

Honeywell t-stat [ 2 Answers ]

I have a problem. I am NOT an electrician nor do I want to be one. I have been shocked more times in my life than I can count. I just remodeled my bathroom and put in a new gfci and a hot tub and new light fixtures. I thought I would get brave and replace all of the t-stats in my house with new...

Stat wiring [ 1 Answers ]

What is the wiring diagram or schematic for a 220V electric water heater thermostat?

Honeywell stat to braeburn [ 1 Answers ]

I have a honeywell stat t8734c1432. I replaced it with a braeburn 5000. I have a staights cool outside condenser and a gas furnace in the attic. I have no heat after changing the stats. The honeywell is a 4 wire stat with a jumper between the y terminal and terminal 1. white is to w, red to r,...

Amana vs honeywell stat wiring [ 5 Answers ]

My system consists of a heatpump(amana ) / air /gas furnace. I'm presently using an amana stat (T874tg189910574101 ) and plan on changing to a Honeywell 7400 5-1-1. The amana stat uses terminals: e jumpered to w2 with tan wire , g , c / x , r , y , and o. The honeywell diagram only shows 5 wires...

View more questions Search