Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Existing Basement Rough-in Uncertainty
[ 7 Answers ]
Hi, I have a few questions regarding a basement bathroom. The house was just built, but there are no plans indicating the drain locations in the basement for the bathroom. 1. How high up do you have to build a subfloor for a basement bathroom when you would perfer not to have to break up the...
Feasibility of adding tub to existing basement bath rough-in
[ 2 Answers ]
Hello. I've spent hours reading through old posts on basement bathroom rough-ins, and I'm definitely more enlighted now than I ever was. But... I have no experience with plumbing and am not confident that I understand all the information I have found on this board well enough to be sure what I...
Adding basement tub- no rough in
[ 1 Answers ]
How can I add a tub or shower in a basement bathroom with only a sink and toilet presently. No rough in for shower present. Thanks!
Adding toilet to existing rough in
[ 1 Answers ]
I am adding a toilet in addition to one that is roughed in so I will have two toilets in the basement when I am done. Do I tie in where the sewer comes in (adding a backflow valve)or can I tie into the existing 3" toilet rough in. Also, I have a middle foundation between the two toilets. Do I go...
Basement bath / kitchenette into existing rough-in
[ 2 Answers ]
Speedball1 wrote in a different thread: "Let me tell you how a typical basement bathroom group rough in goes down. 4" under the cement from the toilet to the main sewer. 2" from the lavatory to connect to the 4" toilet drain line. From the top of the lavatory stubout tee a vent line will be... View more questions Search
|