Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Adding toilet to existing rough in
[ 1 Answers ]
I am adding a toilet in addition to one that is roughed in so I will have two toilets in the basement when I am done. Do I tie in where the sewer comes in (adding a backflow valve)or can I tie into the existing 3" toilet rough in. Also, I have a middle foundation between the two toilets. Do I go...
Tub drain rough-in
[ 1 Answers ]
How far is the bathtub drain off the stud wall. Center of rough in drain to stud wall.
Basement rough in
[ 3 Answers ]
Hi experts! I'm planning to add a bathroom in my basement but I'm confused about the existing rough in. I've attached two pictures that show the rough in from two different angles. There is one 3" PVC pipe that is about 17" from the wall so it can be used for the toilet. I'm confused about the...
Adding a shower to half bath*rough-in question
[ 24 Answers ]
Here's the deal... I am going to be adding a shower to an existing 1/2 bath in my basement. The toilet is vented up out of the slab on the other side of the wall,in my utility closet, makes about a 4' run into another wall where it ties into the lav. /washing machines' drain. the lav./washing...
Tub rough in question in unfinished basement
[ 4 Answers ]
I have 2 questions regarding my rough in for the tub in my unfinished basement. My first question regards the p-trap for the tub. This house was built in 2001. Is it common for the p-trap to be put in when they do the rough-in? I don't know whether to add the p-trap. A few pictures: 1st is a... View more questions Search
|