Ask Experts Questions for FREE Help !
Ask
    topofboone's Avatar
    topofboone Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2009, 04:11 PM
    Carrier weathermaker800 inducer motor noisy
    How do I clean or lubricae this part
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Jan 8, 2009, 05:15 PM

    There is not a place to lubercate this motor while it is installed. If you disasemble the housing you can get some oil down into the bushings.

    Is the noise you mentioned? If so it may be possible to stop that by moving the housing just a bit. There is a very close tolorance between the blower wheel and the housing of the furnace.
    dac122's Avatar
    dac122 Posts: 463, Reputation: 17
    Full Member
    		  
    #3

    Jan 9, 2009, 09:26 AM

    Remove the housing and see what's making the noise. If you have slop in the bearings there's not much you can do. Getting some lubricant down is a long shot, but might help. If you have debris buildup that could also cause a problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace inducer motor [ 5 Answers ]

What are the implications of a furnace inducer motor drawing high Amps?

Inducer motor overheats (carrier brand furnance) [ 10 Answers ]

I replaced my inducer motor on my furnace due to the old one was bounding up. Now the new one runs find in low speed but once the furnace kicks into the second stage the inducer motor shuts down(in high speed) which I believe the thermal overload(built in) opens causing my furnace shut down. When...

Inducer Motor Problems [ 6 Answers ]

I have a Goodman Gas Furnace installed in 1997 and have been experiencing the following problems: The usual run for the furnace has been inducer motor on, ignition (with flames), and then the blower motor comes on. I have been having the inducer motor come on, run for about three minutes,...

Inducer Motor Direction [ 2 Answers ]

I have a Carrier WeatherMaker 8000 and my inducer motor goes in the opposite direction when furnace is not running. Could this cause a mis-firing. Without consistency I get a code 14 or 34 when furnace fails to work. Completed a component test and all seems well. Help.

Our Carrier Furnace Combustion Air Inducer Not Rotating [ 3 Answers ]

It's Saturday night, no luck with finding a service repair guy. It looks like our Carrier White Rodger 36E furnace air inducer rotation is not spinning when we attempt to turn on the heater. The rotation wheel makes a loud grinding sound, we try to help it spin, it goes a little, but then stops. ...

View more questions Search