Ask Experts Questions for FREE Help !
Ask
    smsgmsail's Avatar
    smsgmsail Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 4, 2009, 12:11 PM
    How to replace agitator kenmore elite 23032
    How to replace agitator kenmore elite 23032
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 4, 2009, 01:27 PM
    Most agitators lift to remove. I usually grab the by the bottom on both sides and apply upward pressure. Easy does it cause when it pops off it could hit you in the face since you are bent over with your arms in the machine.
    watson111's Avatar
    watson111 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 20, 2009, 06:11 PM

    I have a 2006 Kenmore Elite washer. The agitator is making a loud noise. It sounds like its loose. If I hold down the top the noise quits. What do I need to replace?
    willhyme45's Avatar
    willhyme45 Posts: 7, Reputation: 1
    New Member
    		  
    #4

    Oct 23, 2009, 02:48 PM

    Is the noise a ratching noise like clicking noise?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Agitator [ 3 Answers ]

I have a Kenmore Elite washer. The agitator does not engage during the cycle. I can turn it clockwise during a wash cycle, so it is not jammed. I have no problems with spin. (yet). Any ideas would be appreciated. I read the notes from Applguy but I have no noises or no problems with spin so that...

Kenmore agitator removal [ 1 Answers ]

Hi Everyone says the same thing... remove the cap remove the sofner dispensor(if there), and then... presto there is the bolt, remove the bolt and slide agitator up and off. My problem is the bolt just seems to spin and spin and spin, if I hold the agitator, the bolt never comes off it just...

View more questions Search