Ask Experts Questions for FREE Help !
Ask
    Leeeeman's Avatar
    Leeeeman Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2008, 12:32 PM
    Kenmore Elite Agitator
    I have a Kenmore Elite washer. The agitator does not engage during the cycle. I can turn it clockwise during a wash cycle, so it is not jammed. I have no problems with spin. (yet).
    Any ideas would be appreciated. I read the notes from Applguy but I have no noises or no problems with spin so that is why I posted a new question.
    Thanks!
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 22, 2008, 01:44 PM
    Replace the cams. Not expensive or difficuilt to repair
    Leeeeman's Avatar
    Leeeeman Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 22, 2008, 02:06 PM
    Do you have any idea what the part numbers are? Can you point me to directions for replacing cams? Thank you so much for your help!
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #4

    Aug 22, 2008, 02:39 PM
    Remove the softner despenser, the bow tie type cap. Use a long extension with a 7/16" socket and remove the bolt and then lift the agitator out. Now separate the 2 halves of the agitator and replace the 4 cams. You can get at your local appliance repair parts house with the model # or on line at HomePage
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore agitator removal [ 1 Answers ]

Hi Everyone says the same thing... remove the cap remove the sofner dispensor(if there), and then... presto there is the bolt, remove the bolt and slide agitator up and off. My problem is the bolt just seems to spin and spin and spin, if I hold the agitator, the bolt never comes off it just...

View more questions Search