Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Venting of multiple fixtures in bathroom,
[ 5 Answers ]
Hello my name is Jef, I'm doing a remodel of an existing toilet with a sink but adding a shower and a washer. Do I need separate vents for these new additions or can I tap into the existing vent? Thanks for any help you may be able to provide.
Painting shiny brass bathroom fixtures
[ 2 Answers ]
Can a shiny brass shower enclosure be painted? Also, can tub and skin faucets that are shiny brass?
Relocating fixtures in basement bath
[ 1 Answers ]
I want to change the plumbing layout in my basement bathroom. All the drain plumbing is under the slab. I need to relocate a toilet shower and sink drains from their original locations.
Clogging in the bathroom fixtures
[ 2 Answers ]
I have a 3 story townhouse in Delaware. I both of my upstairs bathrooms I have a serious problem with the sinks and the tubs/showers clogging. The water will drain but it drains very slowly. Because of how the sinks are made I haven't tried using a snake to push whatever is blocking the drain or...
Relocating bathroom pipes
[ 8 Answers ]
Question. I am in the process of remodeling a bathroom. The bathroom is on the first floor and sits on a concrete slab. The plumbing for the sink and toilet are all under the concrete. The shower that was there had a raised floor and the plumbing was installed under that floor. I would like to... View more questions Search
|