 |
|
|
 |
New Member
|
|
Dec 29, 2008, 05:31 PM
|
|
Kenmore Elite dryer won't work
My Kenmore Elite electric dryer (model 11064972301) has stopped working and appears to have no power (light not working inside either). Have checked house fuse box and re-set but still not working. Where do I go from here on troubleshooting and what could be the problem? Thanks
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 29, 2008, 10:43 PM
|
|
Try checking the door switch. I believe it turns on the interior light and also prevents the dryer from running if the door is open so if it is bad that could cause your problem. There is a wiring diagram on the unit somewhere to assist you in testing this switch. Turn power off and use the OHM's scale for testing and remember you have to remove the wires to test so make sure you write down excatly where they came from so you can put them back on.
|
|
 |
New Member
|
|
Dec 30, 2008, 05:30 PM
|
|
I have purchased a tester and tested the outlet and the wiring on the dryer unit... those all worked fine. I am unable to find the door switch wiring and even having trouble getting to the wiring as I can't get the back off the dryer. The books that came with the dryer have not been helpful. Should I just call a repair person at this point or keep pursuing the problem on my own? Thanks:confused:
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 30, 2008, 05:41 PM
|
|
The door switch is usually accesses by removing the front of the unit since that is where the door is. You have to pop the top to get to the upper front door screws. If you feel uncomfortable working on the unit I would by all means call a appliance repair person.
|
|
 |
New Member
|
|
Dec 30, 2008, 05:45 PM
|
|
Okay, will give that a try. If/when I do get to the door switch and if that is the problem, is that a part I can purchase and repair on my own or will I still need to call a repair person? I appreciate your help.
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 30, 2008, 05:56 PM
|
|
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 30, 2008, 05:58 PM
|
|
 Originally Posted by hvac1000
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 30, 2008, 05:59 PM
|
|
Switch, door assembly
Part # 3406107
Category: Laundry Appliances
$13.75 In stock Quantity Add to cart
See estimated delivery date
But check the part number yourself to be sure this is it.
|
|
 |
New Member
|
|
Dec 30, 2008, 06:01 PM
|
|
Have found this part when took the top off. Trying to get to the wiring to test them now. I'm just encourage that the part I found looks like the one in the picture you sent. We'll see how it goes. Thanks
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 30, 2008, 06:02 PM
|
|
OK. I hope you find the problem.
|
|
 |
New Member
|
|
Dec 30, 2008, 06:19 PM
|
|
Yep, you gave the right part # (matches the one I removed). Found a Sears service center with the part within driving distance so will try to pick up and hopefully that will fix it. Once again, thanks for your help:)
|
|
 |
Heating & Air Conditioning Expert
|
|
Dec 30, 2008, 08:44 PM
|
|
Good deal.You will be beck to washing and drying before you know it.
|
|
 |
New Member
|
|
Dec 31, 2008, 06:16 AM
|
|
Oh Joy!:D
|
|
 |
New Member
|
|
Jan 6, 2009, 04:55 PM
|
|
THANK YOU again for your help... had to end up ordering the part which just came in... once installed the dryer started right back up! Now to catch up on all that laundry! Once again, thanks... you saved us tons of money by not having to have a repairman come out! :D
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Kenmore Elite he3 Dryer
[ 2 Answers ]
My Kenmore Elite he3 electric dryer does not heat up. The "Check Lint Screen" light stays on even though I have cleaned it, the inside of the dryer, and the vent pipe. Can you tell me how to get my dryer to dry clothes again?
Thanks
Kenmore elite HE4 dryer
[ 1 Answers ]
This unit has had numerious problems, I have repaced the pwr supply twice now the unit is displaying a power failure and will not reset by pressing the start button which is what the manual tells you to do. God any suggestions on what to do?
View more questions
Search
|