Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Copper L pipe to black iron pipe
[ 19 Answers ]
Hello This is a natural gas application. Can flexible L copper pipe be coupled to black iron pipe and then buried? I will paint and wrap the black pipe before burial. Thanks Ruko
Galvanized pipe to either Copper/CPVC pipe
[ 14 Answers ]
I had a leak in my cold water feed which happens to be galvanized pipe. It was between 2 floors and I cut out the affected section. I am going to replace the cut out section with either copper or CPVC. But how does one connect unthreaded galvanized pipe to the after mentioned pipes? I don't know if...
Copper pipe to iron pipe
[ 2 Answers ]
How would you connect a 1/2" copper pipe to a 1/2" galvanized iron pipe that has been cut and has no threads? Do I need to re-thread the iron pipe, screw on a brass attachement and solder the other end to the copper? If so, what is the name of the tool use to re-thread the iron?
Re-sealing pvc/iron drain pipe connection? (see pic)
[ 4 Answers ]
Hello, Noticed the drain pipe leaking today in the basement whenever the toilet upstairs was flushed (sink/shower did not seem to make it leak). It was only leaking maybe 1/2 - 1 cup of water each time the toilet was flushed. Called a few plumbers. Only one got back to me so far. Said...
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran... View more questions Search
|