Ask Experts Questions for FREE Help !
Ask
    jsda's Avatar
    jsda Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 6, 2008, 08:59 AM
    Furnace shut off without getting to set point
    I have a Trane packaged unit model YCC036-SF-14A. It started not heating when heat was called for or just shutting off with out making set point. I thought is was the thermostat but with a new one same results. It will reset it I turn the thermostat off for 5 seconds then back on. I have no fault codes but the on the igniter board the LED stays on solid red when its in fault.
    Would appreciate any advice you can give
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Dec 6, 2008, 09:46 AM

    Jumper the R-W circuit at the unit and see if the problem still occurs. If not, you have a problem with the thermostat or the wiring between the t-stat and the unit.
    jsda's Avatar
    jsda Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 6, 2008, 02:20 PM

    Does anybody have the fault codes for this furnace?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #4

    Dec 6, 2008, 02:29 PM

    Fault code list/label can usually be found inside one of the service panels. In some cases it may be on the circuit board or ignition module housing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace fan won't shut off [ 2 Answers ]

We have a 20+ year old forced air propane gas with central air. The air conditioning was just installed last year and things worked fine. But since we switched from heating to air conditioning the fan will not shut off whether the system is in "heat" or "cool" or "off" and the fan in "auto" or...

Furnace shut down [ 2 Answers ]

A goodman furnace. Starts up with the induction fan.. and runs good, then electronic ignighter glows and the gas valve opens , then gas lights and system runs for about 10 seconds, then when the blower kicks on but everything else shuts off except the blower , I thought it was the PC board so I...

Furnace won't shut off [ 2 Answers ]

My electric furnace was kicking the breaker and shutting down. I'd reset and it would work fina a week oe two then blow it again. Now it won't shut down. Is this a thermostat problem or something else.

Furnace will not shut off [ 1 Answers ]

I have an electric Coleman furnace which comes on when it should, but will not turn off When the set temp is reached. Even manually using the on/off switch will not stop it. The only way is to flip the circuit breaker. What is going on ? Thank you.:confused:

View more questions Search