 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trouble/w ceiling fan speed switch
Hi, there, so, I'm trying to make this ceiling fan work cause the 3speed switch broke and I got this new one that I connect properly but won't make the fan run, though. I can hear this buzz when I flick the power switch can you guys help here?
|
||||
|
||||
|
I did a search for 3 speed fan switch in this forum, and found this:
https://www.askmehelpdesk.com/electr...nt-284283.html Do a search yourself, as there are several other posts that may help. |
||||
|
||||
|
You probably don't have the right replacement switch. See: Ceiling fan pull chain replacement and repair - Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected....
I removed the speed switch without marking which wires went where. It is a Hampton Bay. Any suggestions as to where a diagram or adivce can be found for the wires? Thanks in advance. Edie
I replaced the pull chain on my 3-speed ceiling fan and forgot to write down the color coding of the wires going into the switch. The switch is marked 1,2,3,L. The wire colors are; black, orange, yellow, purple. Where to they go?
Looking for information on how does 5 speed fan rotary switch for a ceiling fan increase and decrease the fan speed at any given time.
I have a ceiling fan that is approximately 20 years old. I took out the speed control switch, and thought I remembered where the wires went. The switch has two holes per connection. It has Line, 1 2, 3. Apparently I didn't put the wires back correctly. I only get two speeds - high and low. There...
View more questions Search
|
