Ask Experts Questions for FREE Help !
Ask
    ede101's Avatar
    ede101 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2007, 05:45 PM
    Ceiling fan speed switch
    I removed the speed switch without marking which wires went where. It is a Hampton Bay. Any suggestions as to where a diagram or adivce can be found for the wires?

    Thanks in advance.

    Edie
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 19, 2007, 06:29 PM
    Try:

    L------- Black ------ or ----- Orange
    1------- Grey ------- or----- Black
    2------- Brown------ or----- Yellow
    3------- Purple------ or----- Purple
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jun 19, 2007, 08:51 PM
    What color wires do you have? There are no diagrams anywhere.

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan speed switch [ 6 Answers ]

My daughter's ceilng fan stopped working due to a faulty speed switch. When I opened up the canopy and unplugged the 9 prong coupler I then proceeded to take out the switch. Dumb move on my part. Should have marked wire colors down first. New (and old) switches both have L, 1, 2, & 3 imprinted...

3-speed ceiling fan switch repair [ 1 Answers ]

I replaced the pull chain on my 3-speed ceiling fan and forgot to write down the color coding of the wires going into the switch. The switch is marked 1,2,3,L. The wire colors are; black, orange, yellow, purple. Where to they go?

How does a ceiling fan five speed switch work? [ 4 Answers ]

Looking for information on how does 5 speed fan rotary switch for a ceiling fan increase and decrease the fan speed at any given time.

Ceiling fan speed switch [ 2 Answers ]

I have a ceiling fan that is approximately 20 years old. I took out the speed control switch, and thought I remembered where the wires went. The switch has two holes per connection. It has Line, 1 2, 3. Apparently I didn't put the wires back correctly. I only get two speeds - high and low. There...

Ceiling Fan Pull String 3-speed Switch [ 1 Answers ]

What if someone by mistake wrongly connect the load on the switch (L) to one of the other wires (yellow, red, green)? Can this (cross wiring or mixing) cause (cross-wire) damage to the motor? Please help. I need this help urgently.

View more questions Search