ceiling fan 3 speed switch replacement. purchased new one, took off the old bad switch wiring as follows: L = RED 1 = BLACK 2 = BLUE 4 = BLACK I rewired EXACTLY as came off the bad switch and as marked on the new switch, plug it in, pull the chain and NOTHING happens on ANY amount of...

I have an old ceiling fan that has a three way pull string switch which is working properly(1. off,2. High, and 3. current to a rotary speed control switch). The speed control switch is broken. I have not been able to find a new switch as there is not a manufacturer's name on the switch, however...

The pull chain came out of my celing fan switch and I need to replace it. I purchased the switch and it has connections for 4 wires labeled 1,2,3 & L. I mistakenly rempved the old switch before checking the wireing and am having trouble getting the new one wired right.

Have a celing fan I purchased at Lowe's. The UL fan speed control (solid state) burned up. Actually has a burnt hole in it. Listed as E161552, control 0604. Trying to find out if I can reasonably purchase the speed control or whether I should just buy a new fan. Only about 15 months old. ...

I replaced 2 hunter fan pull switches. They are the double stacked switch similar to the 5-8 wire fan switch at Lowe's #33906. I cut one wire at a time and correctly inserted into correct numbered hole per stack. My fan works but not correctly as it only has two speeds. They both operate the...