Ask Experts Questions for FREE Help !
Ask
    e1954's Avatar
    e1954 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 25, 2008, 08:02 PM
    Wiring digram for recessed lighting
    How to wire 4 recessed lighting using a single pole light switch
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Oct 25, 2008, 08:04 PM
    Have you done any electrical work before?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Recessed Lighting [ 8 Answers ]

Need help with Recessed Lighting. The included picture is an electrical diagram I used in wiring up some recessed lighting. The switches used are 600w Dimmer Switches with push on/off feature. The problem is that on the center switch the dimming feature burns out consistently but I am still able...

Recessed Lighting [ 4 Answers ]

I don't have any electrical boxes in my ceilings in any of the rooms in my house. I would like to install recessed lighting in family room, kitchen, and living room. What is ballpark costs to have this installed? ? I would also like to get ceiling fans installed in the 4 bedrooms. What is...

Recessed lighting [ 2 Answers ]

I am renovating the kitchen and would like to know in a kitchen with the dimensions of 14ft by 11ft space how many ceiling lights would be required? Is there a minimum that you should have for that amt of space and how far from the wall should they be and how far apart from each other. Thank you

Recessed lighting romex [ 4 Answers ]

Very quick question... I am installing recessed lighting. Total of 7 cans that will house 60 watt bulbs. Should I use 14/2 or 12/2 romex to between cans? It is a 15 amp circuit and 14/2 enters the original junction box. Thanks.

Wiring a basement with switches and recessed lighting [ 6 Answers ]

Hi I am wiring my basement for first time with "guidance" of an "electrician" Ive used 14/2 wiring I am installing a total of 10 recessed lighting in 2 zones, 5 in each. And 10 wall switches , 5 in each zone as well This is how I have started Run 1 14/2 wire from panel to shortest run for each...


View more questions Search