Ask Experts Questions for FREE Help !
Ask
    sanford01's Avatar
    sanford01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2008, 07:23 PM
    Wiring connection
    I have a problem with the color wiring of my furnace. I had to remove the Thermastat
    2 wires that come from my thermastat to the furnace and connect these wires to the furnace wires.
    There are 4 color wires coming from the furnace which I want to connect to the wires coming from the thermastat.
    The colors are blue,green,white & yellow.
    The wireing coming from the thermastat are two in number
    (1) one red & one white
    (2) one blue,one green,one red,one orange,one yellow,one black,white
    Which wires are connected from these two cables to the furnace wires?
    I appreciate any help you can give me... Thanks
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Oct 25, 2008, 08:10 PM
    If it was me I would go with the red and white wire, with the red on RH an the wite on W1 at the thermotstat. Its hard to say not knowing what wires was used with the old T-stat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring Connection on a Briggs and Stratton [ 2 Answers ]

I am trying to connect the wires on a ridding mower. The engine is from the 80's and the mower is from the year 2000. The problem is the mower frame has 1 wire going to the alternator and one to the armature. The engine I am trying to connect has a two wire harness from the alternator and one...

Ground wire connection for OLD wiring [ 1 Answers ]

Hello, I wired up my basement with new wiring but hooked it in to old wire supply that is in a metal case and only has two wires. IS there anyway to make the ground wore in the new wiring functional? Also, when wiring the outlets, I tire the ground wire to the metal box as I was supposed to in...

Thermostat/Furnace Wiring Connection [ 1 Answers ]

Whew! It's over a 100 degrees in this house. My blower will turn on but the outside compressor will not. I notice that I now have a loose yellow wire inside the Goodman furnace. This yellow wire comes from the Y terminal on the thermostat. It must be related to my problem, but I don't know...

Thermostat Wiring Connection Conundrum - HELP! [ 1 Answers ]

I purchased a Ritetemp Thermostat model #8035c. The HVAC system installed in my condo is forced air furnace heat/electric compressor cooling and was manufactured by Gaffers & Sattlers (circa 1973). Any guidance on how to connect the wires to the thermostat is greatly appreciated. There are...

View more questions Search