Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pool pump and booster pump timer diagrams
[ 2 Answers ]
I am looking for a diagram that shows how to hookup two intermatic timers to the pool pump and the booster pump. Running 220volts
Pressure falls in booster pump
[ 3 Answers ]
I'm new user and hope that someone know the answer, I have installed a 250 gal. water storage vessel and a booster set up including a 25 gal. pressure tank and a pump which has the max. capacity of 40 gpm and 60 psi. the problem is that when I set the pressure tank to 15/30 psi cut-in/cut-out...
Hooking -up a pool pump from a new timer when wires are not right
[ 1 Answers ]
I honestly thought this was going to be a slam dunk and now I'm ridiculed amongst my peers. The wires coming from a pipe that is cemented in the ground are not your normal black white ground. There are 2 black and a green. Coming from the pump there are 2 red and 1 gray . The timer has indicated...
Booster Pump Problem
[ 1 Answers ]
OR, by email: Mailto:[email protected] This is the message: Hi Tom: My internet service was turned off a couple days before I left Grenada. As a Result I had not seen your latest comments on the pump as it presently exists.
Setting up a Booster Pump.
[ 13 Answers ]
Hello: I recently remodeled my home and I am having a problem resolving an issue with a booster pump. My city water supply is frequently low so I am presently forced to depend on a gravity supply from a tank located at approximately 10 ft above the main house. The original system was set... View more questions Search
|