Ask Experts Questions for FREE Help !
Ask
    collettanita's Avatar
    collettanita Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2008, 04:04 PM
    Furnace still won't work
    I wired r and w together at the furnace and it still won't work what could it be
    garrie's Avatar
    garrie Posts: 1, Reputation: 0
    New Member
    		  
    #2

    Oct 18, 2008, 04:12 PM

    I'm trying to hook up a new noma programmable thermostat from a old coleman thermostat but there are 7 wires on the coleman 1green 1 yellow 1 white b 1 black 1 pink and 1 light blue and the yellow jumped from y to w1
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Saturn won't start, power locks won't work, radio resets itself. [ 4 Answers ]

My 99 Saturn has had some starting problems in the past. It would sometimes not start but if you let it sit from anywhere from 45 minutes to 24 hours, it would eventually start. Or, after having Dad look at it, we could tap the starter and it would work. So we thought it was the starter. I...

Carrier Heater won't shut off! Blows only cool air. Heat won't work! [ 1 Answers ]

Does anyone know what I can do? My carrier heater is only 2 years old. As of yesterday the heater unit wouldn't shut off and when I turn the heat up it just keeps blowing cool air. I heard I can trip a breaker switch. Is that the electrical switch in the garage or on the heater itself? Please let...

Furnace won't work [ 4 Answers ]

I have a Rheem upflow mid efficiency furnace with inshot burners and pilot light. It worked until last night and now when you turn it on heat or turn the temperature up the heat won't kick on. Its at 67 right now and I'm calling for 74 degrees. I've got young children in my home and its getting...

Kenmore he4 panel won't work and dryer won't start [ 1 Answers ]

I have had the circuit board/panel replaced once on my he4. I had only 2 weeks left on the warranty and figured it should be OK once it was fixed. They wanted another $200 to renew the warranty! Didn't have the $$ at the time. Anyway, the same darn thing is happening... you have to push the buttons...

Goodman Furnace Issue - Heater won't work, no fire [ 1 Answers ]

My Goodman heater won't fire up. When I turn the heat on, the sequence of events: 1) Small fan at top section turns on. 2) Heating element turns on, bright red. The system sounds like it is trying to turn on. 3) Then the bright red goes off. The fire does not light. The fan does not start 4)...

View more questions Search