 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kitchen remodel
I have a basement (dirt floor) with a ceiling height around 6 ft high. I am planning to install a sub panel in the basement to supply circuits to a kitchen on the first floor. Can I use romex from the sub panel to feed circuits to the kitchen above? The basement walls and ceiling have exposed studs and floor rafters.
Thanks in advance |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
We need to install our sink and the dishwasher, the existing drain pipe for this is currently blocking the dishwasher in the back. I need to know if I can change the drain from the current pipe into a 2 inch vent pipe. Tough question to ask and hard to describe. Any help would be wonderful.
I am starting a remodel and planned to go to an island from a peninsula bar. Looked as if the plumbing was from the floor and the water lines are. Just opened the wall and the drain line runs back into a wall that I was going to remove. Here is the full deal. One wall I was going to remove I...
1. The plumbing stack runs through a wall that I would like to remove 2. I pulled down the drywall ceiling and I see it runs from the basement straight up through the kitchen wall I would like to remove, then 90's towards the back of the house and then to a T joint for the shower drain which is...
I've been watching too much HDTV. A general question about kitchen remodels. I don't have the budget to gut my kitchen, but this year I would like to add value to the room. How much in return to you get from an update versus a remodel. As in my previous post, I will more than likely have to buy...
Am doing a kichen remodel and I have 100 watts panel with 3 spaces one for the range one for the refrigarator I want to install 12 outlet and 7 reses lighting is this enough circuts or I need to buy a sub panel.
View more questions Search
|
