Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Won't stay lit
[ 5 Answers ]
My ignition lite is on. But it goes to start and ignites for only about 30 seconds and goes back out, but the little flame stays on.what does this mean?
Furance won't stay on
[ 1 Answers ]
My furance turns on for about30 seconds then turns off for about 3 seconds never long enough for blower to come on
Old B&S won't stay running
[ 7 Answers ]
I need help. I have this old B&S motor and it run if I put gas straight into the spark plug and air filter but will run for 3 seconds then die. Anyone help me?:confused:
Won't stay running
[ 14 Answers ]
I have a 91 crx it sat up since may and I just put a d15b vtec in this past weekend. I sat the engine in and hooked up all appropriate connectors with the exception of two wires that is close to the intake manifold (yellow w/ green and a black) I have no clue where they go all I know is if you...
Pilot won't stay on
[ 3 Answers ]
I have a snyder-general furnace and my pilot won't stay on after you turn it from pilot to on I tried evrything... is it the thermocouple or does this furnace have a sensor... and if so how do I change it out... furnace was manufacture in 91... View more questions Search
|