Ask Experts Questions for FREE Help !
Ask
    garyjohnson3359's Avatar
    garyjohnson3359 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2007, 05:41 PM
    Furance won't stay on
    My furance turns on for about30 seconds then turns off for about 3 seconds never long enough for blower to come on
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Nov 24, 2007, 06:54 PM
    Can you give us some more info? What brand is your furnace and about how old is it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat won't stay on [ 1 Answers ]

I have an electric heat/air unit. When I turn the heat on it only runs for about 7 sec. then shuts back off. It will kick off and on until I turn the unit off at the thermostat. It won't stay on long enough to feel if it is warm air or not. Please help! Is it the thermostat or something else?

Won't stay running [ 14 Answers ]

I have a 91 crx it sat up since may and I just put a d15b vtec in this past weekend. I sat the engine in and hooked up all appropriate connectors with the exception of two wires that is close to the intake manifold (yellow w/ green and a black) I have no clue where they go all I know is if you...

Pilot won't stay on [ 3 Answers ]

I have a snyder-general furnace and my pilot won't stay on after you turn it from pilot to on I tried evrything... is it the thermocouple or does this furnace have a sensor... and if so how do I change it out... furnace was manufacture in 91...

Mower won't stay running [ 2 Answers ]

My mother inlaw has a JD riding mower that's about 8 yrs old and has been in the weather for about the last 6 mnths, and it won't stay running unless I put the booster cables on it and jump it from my truck. It will run as long as they are hooked up but the moment I disconnect them it dies.Is this...

View more questions Search