Ask Experts Questions for FREE Help !
Ask
    epco2's Avatar
    epco2 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Aug 21, 2008, 10:29 AM
    Squeeky Kenmore clothes washing machine
    We just replaced the coupler (a common problem I understand) between the motor and the gear box in a 6 year old Kenmore. It is back to working properly, but part way through the first load, it started to squeak. That wasn't happening before I replaced the coupler. I am wondering if there was suppose to be a washer between the coupler and the gearbox? Or is there something else, maybe that caused the coupler to break in the first place?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Aug 25, 2008, 02:39 PM
    I see your method of replacing the coupler did not work so well.
    epco2's Avatar
    epco2 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Aug 25, 2008, 11:14 PM
    Well, a little spray with WD-40 and the squeeking went away. I did find out that the "dogs" on the agitator were worn out, so I replaced them while I was working at it. Everything seems to be OK now.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Washing Machine [ 1 Answers ]

What does a fault code F-3 mean for a kenmore elite washer. Jimmy

Kenmore Washing Machine [ 1 Answers ]

My Kenmore 70 series model 110 will not spin on any cycles

Kenmore Washing Machine [ 2 Answers ]

My Kenmore model # 110. 91551210 wahing machine, will not agitate or spin, in none of the cycles, it will fill with water and drain, I also can hear the moter running but it will not agitate or spin, what is the problem?:confused:

Kenmore washing machine [ 1 Answers ]

My washing machine will not spin out the wash cycle or the rinse cycle. When I hold the lid latch down and turn the tub with my hand and it will start spinning fine. I can see it try to start spinng but it cant

View more questions Search