Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Thermostat Wiring, have NO A/C working
[ 3 Answers ]
I tried to change from our Bryant non programmable termostat (w/ mercury) to a Lux non programmable thermostat (non mercury). The LUX thermostat did not need as many wires that the Bryant thermostat needed. There was an A screw, but don't know what wire goes on A. There was a jumper between...
New thermostat air not working
[ 3 Answers ]
I hooked up my new honeywell RTH230B thermostat and the heat seems to be working, but the airconditioning won't come on. I hooked the W to the W, the Y to the Y, the G to the G, the R to the Rh and the C to the Rc. At first I tried it without the jumper between Rh and Rc because that's what it...
Thermostat not working
[ 2 Answers ]
I have a maple-chase thermostat #09600 (programmable) that will not operate. It was working fine until a spark of static electricity from my finger to the unit caused it to malfunction. I tried pushing the reset button but no luck. I have researched the manual but cannot find anything that...
Thermostat not working
[ 1 Answers ]
My ceiling heat won't shut off when I turn down the thermostat. How do I find out if the thermostat is broken? View more questions Search
|