Ask Experts Questions for FREE Help !
Ask
    gmtorg's Avatar
    gmtorg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2008, 07:31 AM
    Whirlpool washer drain hose replacement
    How do I replace the drain hose on my Whirlpool top-load washer?
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    Aug 8, 2008, 06:53 AM
    That has to be stated in your service and operational manual. Don't you have that?

    If so : try any of the following links :

    Manage my Home on-line website for on-line manuals

    http://www.sears.com/Service

    http://www.searspartsdirect.com/partsdirecta

    http://www.searspartsdirect.com/partsdirectb

    My first reaction would be : replacement of the drain hose is easy to do yourself.
    FIRST REMOVE the power plug from the socket, and put it on the floor before you.
    Remove the back panel.
    Follow the existing drain hose to locate the pump motor.
    Compress the spring that firms the hose to the pump and remove the old hose and replace with new one. Make sure the spring is positioned properly again afterwards.
    Close the back panel. Plug in power cord again. Check proper functioning of drain system.

    Success!

    As always : if you require more info, please let me know. Post your queries here please. Than contact me by private mail (click my handle and proceed as instructed). I will react here on this page afterwards.

    If this solves your problem, please rate the answer provided! Feed back is always appreciated!

    :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drain hose on washer [ 2 Answers ]

The drain hose in my washing machine is backing up. I had to replace the pipe that the hose sits in. It is about 3 inches shorter than the old one. Not sure if this has anything to do with the back up. It starts to drain fine, and then water comes out the top of the pipe.

Must play with drain hose to get washer to drain and spin [ 1 Answers ]

Hi, I have a GE WCSE6270 Washer. After the washer fills and agitates, it starts to make a gurgling, clicking noise and will not finish the cycle (i.e. drain and spin). I noticed that the drain hose in the back was a little leaky, and in trying to play with it, it made the washer drain and spin...

Drain hose on washer [ 1 Answers ]

Where can I go to get one, mine doesn't come wioth one since its used. One hose is small and the other dopubles it right. The one on the wall is much larger than the one on the machine

View more questions Search