[LadyFid]

My father's Drain but he called me and I am stumped. It is a flip un to open down to close levers attached to the overflow plate. He wants it down /drain open while he showers but it pops back to closed. He replaced it but is questioning his install and the problem isn't fixed. He assures me the drain isn't clogged as so long as he holds the letch down manually it drains just fine. Any thoughts or ideas would be greatly appreciated.
[email protected]

[Milo Dolezal]

The latch is spring loaded. Chances are that it rubs against back wall of the overflow. Take screwdriver, remove cover plate and inspect the latch assembly for smooth operation. Also, it is possible that the closer (piston) inside your drain is rubbing against the walls of the pipe. In this case, remove upper plate, pull out rod and piston, apply plumber's grease and reinstall.

[speedball1]

My father's Drain but he called me and I am stumped. It is a flip un to open down to close levers attached to the overflow plate. He wants it down /drain open while he showers but it pops back to closed. He replaced it but is questioning his install and the problem isnt fixed. He assures me the drain isnt clogged as so long as he holds the letch down manually it drains just fine. Any thoughts or ideas would be greatly appreciated.
[email protected]

I have put up two types od tub wastes and overflows, (see image) which type does Daddy have? Back to you, Tom