Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No hot water pressure after replacing upstairs shower fixtures
[ 2 Answers ]
Hello all. I tore out the wall and replaced all of my upstairs shower knobs and shower head. The cold water runs fine, but when I turn on the hot full blast, I just get a trickle. Worked fine before (was just leaking). The sink hot water works well. Is there a pressure issue I need to know about...
Replacing shower fixtures.
[ 1 Answers ]
I have an old house. I went to turn the water off in my shower yesterday and the fixture that controls both the hot and the cold water came off in my hand. I went to the store to get a new one and they told me that they quit making the kind htat I have about 15 years ago. I was told that I would...
New Bath & Shower Fixtures
[ 2 Answers ]
I had a new shower/bath area built and plumbed quite some time ago. I have finished tiling and an ready to have the shower nozzle, hot/cold knobs, and bath faucet installed. I was just told the pipes that were installed must match the brand of fixture. Is this right? I have no idea what the...
Replacing landscape light fixtures..
[ 6 Answers ]
We have a landscape lighting (that goes the length of our walkway on both sides) that was installed when the house was built, and that was 14 years ago. The light fixtures are getting chipped and moldy and I want to replace it for a much up to date ones. Is it possible to change just the fixtures...
Replacing bathtub and shower fixtures
[ 4 Answers ]
(1) When replacing bathtub "snout", shower controls etc.. Do you caulk around the fixtures or use plumbers puddy? The original installation had plumbers puddy. (2) Do you place the caulk so the fixtures "sqeeze" out some material or just inside the fixtures? Example: I've obtain some... View more questions Search
|