Ask Experts Questions for FREE Help !
Ask
    mk1000's Avatar
    mk1000 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2008, 04:39 PM
    Hampton bay ceiling fan - motor is not working
    I have hampton bay ceiling fan with light and after several year of work it stops [motor is not working. Any idea what to check? The dip switches already checked on receiver and transmuter
    Mr_am's Avatar
    Mr_am Posts: 105, Reputation: 4
    Junior Member
    		  
    #2

    Jun 29, 2008, 07:07 PM
    Can you run it manually ? If so your problem is the IR transmitter.. or the receiver (less likely)...
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jun 30, 2008, 09:39 PM
    Does it have pullchains?

    Does the LED light on the remote?

    http://www.ceiling-fans-n-more.com/c...e-controls.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Ceiling fan not working with Receiver/Remote [ 5 Answers ]

Hi, I bought a Hampton Bay Ceiling fan with a remote. I was able to put up the fan and it works along with the lights. When I tried installing the receiver on the fan, the fan will not work, with the remote, nor manually, as almost like no power is going to it... As soon as I remove the...

Hampton ceiling fan not working well [ 2 Answers ]

I moved and installed a 4 years old ceiling fan from the living room to the family. Everything is working well (the light, remote control ,etc.) However the fan is only in low speed. It doesn't want to go on hi speed. What is the problem? Is the motor burn out? Thanks, Joel

Hampton Bay ceiling fan not working [ 4 Answers ]

I replaced an existing chandler with a Hampton Bay ceiling fan/light. The chandler worked fine and was controlled by a "middle of the run" wall light switch. The ceiling fan and lights have never worked. I plan to operate the ceiling fan and lights using the pull chains a not via a remote. I...

Hampton Bay Ceiling Fan light feature not working. [ 1 Answers ]

The ceiling fan works as a fan, but the light fixture does not work. Worked for prior 3 years. Changed bulb when went out, but no luck. Tried the new bulb in my other fan to make sure it was not faulty. It was fine. The remote works.. again used the remote on the other identical fan. Need to...

New hampton bay motor not working, lights work [ 3 Answers ]

Hi - I just installed a new hampton bay carriage house II 52" ceiling fan with light assembly (no remote; pull strings for lights and fan, and two position fan switch). I used the wiring from a previously existing ceiling light. I tested the wiring by running them to a grounded plug assembly,...

View more questions Search