Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Interior bathroom door
[ 2 Answers ]
The door there now is very small. If a standard 24" wide door would fit it would be great. the door itself is 21 1/4 wide. but measuring from trim to trim accross is 28" I don't know if a 24" will fit, they come with the jambs attached. I guess I should remove the trim piece to see what the...
Painting metal interior door
[ 9 Answers ]
I tried to intoduce myself but could not figure out where to go to do so. I am trying to repaint a metal interior door. It is currently white. Is there special paint for metal? I don't want brush marks on the door so do I roll it? If so what kind of roller. Do I need to prime the door first even...
Interior door header
[ 2 Answers ]
Im planning an an eight-foot framed opening in an interior wall between kitchen and family room. Interior wall runs parallel to the rafters supporting a gable roof. The wall is directly under one of the rafters. Is the wall load bearing? What size does the header need to be?
Interior door keeps swinging open
[ 2 Answers ]
Months I ago I applied WD40 on the hinges of the basement door to halt it's incessant squeaking. Since then the door keeps "straying" open, apparently because the floor is somewhat sloped. What can I do to end the door's wandering ways?
Interior Door Framing - Basement
[ 1 Answers ]
I've framed around the exterior walls of my basement. I will be framing a partition wall in a few weeks which will include framing for interior doors. My plan is to buy pre-hung doors, I have seen they only come in one standard height - which would require a framing height of 82 1/2". My problem... View more questions Search
|