Ask Experts Questions for FREE Help !
Ask
    Trayman's Avatar
    Trayman Posts: 1, Reputation: 1
    New Member
     
    #1

    May 29, 2008, 04:25 AM
    Reset Pressure Switch for a RUDD A/C condenser
    I had a maintenance guy come out and reset the pressure switch on my condenser outside because my A/C was not working. I cannot figure out how he reset the pressure switch. I have all the breaker switches on in the main braker console for the house. I think the pressure switch is a red button near the bottom outside of the condenser. Is the pressure switch the red button outside of the A/C condenser? My RUDD A/C is two years old. When I press the pressure switch button it doesn't seem to do anything. Is the button supposed to kick on the condenser fan? Should I hold the button in? What is going on with the pressure switch? Is there something else I need to do. :)
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    May 29, 2008, 09:34 AM
    You need to have the unit checked by a professional. It is probably overcharged with refrigerant causing it to cut out. Hitting the reset is not the cure and could possibly damage the unit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

AC Inside Blower Stops, Condenser runs continuously Until Entire Unit shut off & Reset [ 6 Answers ]

I have a Trane compressor outside. The unit comes on and the interior blower comes on for a few hours and then stops blowing. I tried to turn on the fan via the thrmostat and it does not work when it shuts down but otherwise works fine so its not a wiring problem. The outside unit continues to...

Square d pressure switch reset [ 1 Answers ]

The electrical line from my water well pump control box to the well was cut and we lost all water pressure, repaired line and I still have no water is there a reset on the square d pressure switch. I have power 240 coming out of the control box but not to the well no other cuts in line.

Reset switch on a whirlpool dryer [ 1 Answers ]

Where is the reset switch on a whirlpool dryer?? Ita a semi-pro 10kg 3RAWZ481E MLO


View more questions Search