 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Square d pressure switch reset
The electrical line from my water well pump control box to the well was cut and we lost all water pressure, repaired line and I still have no water is there a reset on the square d pressure switch. I have power 240 coming out of the control box but not to the well no other cuts in line.
|
||||
|
||||
|
The reset on a square d switch (lever on the side) is a feature not on all of them. It is there to cut off the switch if the pressure drops 10# or more below the cut in pressure. It does this to protect the pump from running dry. If you have this lever, pull it to reset the switch. However, it sounds like you have power at the control box (not sure what that is) and not at the switch, then you still have a problem upline between the switch and the breaker. Am assuming you have reset breakers and that you had power at the repaired splice in the wire.
This site shows how to reset your switch. Boulder/GNC Water Well: How to reset a Square-D Low Pressure Cutoff (-M4) Switch |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi everyone, I am having problems with my well this week and right now have no water at all. I saw earlier in the week that the old pressure switch contacts were in very bad shape so I cleaned them but a day later it quit working. I bought a new switch this morning and put it in after about 10...
I recently purchased a house that is serviced by a well. The pressure tank is located outside next to the house in a small shed. The previous owner wired a receptacle into the square-D pressure switch to allow them to power a light bulb to keep the pipes from freezing. The circuit is protected...
My well pump does not shut off after building up pressure 20-25lbs of pressure what is wrong thanks fsherman
My square d water pressure switch 30-50 cut in and out switch needs help.when it drops to 30 cut in pressure it trips the circuit breaker has to be manually starter with lever on the side of the square d switch,it might work properly 3 or 4 times then it trips the circuit breaker please help if you...
View more questions Search
|
