Ask Experts Questions for FREE Help !
Ask
    mikecave81's Avatar
    mikecave81 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 19, 2008, 07:23 AM
    Snapper sr 1028
    My snapper sr 1028 was working great last summer now I have a problem it will not start and it also is blowing fuses
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
    		  
    #2

    May 19, 2008, 08:37 AM
    Quote Originally Posted by mikecave81
    my snapper sr 1028 was working great last summer now i have a problem it will not start and it also is blowing fuses
    There are too many possible causes for that problem to occur. Please provide more details, if you want advice.

    First check if everything can turn (i.e. that the mower is not blocked by material or rust). Normally that is the cause why it is blowing fuses.

    Ciao !
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snapper Choke [ 5 Answers ]

The choke on my Snapper Lawn Mower sticks. Any advice on how to get the choke to release?

My Snapper won't start [ 3 Answers ]

:confused: :confused: :confused: I have an old Snapper push mower that I bought last summer used, it was running fine then, but now it won't start. I cleaned the air filter, secured the spark plug, but no fire at all. Any suggestions? Thanks Dan:confused:

Snapper lt12 [ 1 Answers ]

I have a snapper lt12 and I just bought a new solendoid for it. I have it wired up just like the book says and when I try to connect the battery it sparcks and starts smoking. If you know how to help me please email me. [email protected]

Snapper engine ID? [ 3 Answers ]

How do I identify which engine I have on my Snapper rear-engine rider? It's a model 30085 that I picked up for $20, and I need to replace a couple of things, but need to know what engine I have. Thanks for the help!

View more questions Search