Ask Experts Questions for FREE Help !
Ask
    Maxsteele1992's Avatar
    Maxsteele1992 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 10, 2007, 02:24 PM
    Snapper lt12
    I have a snapper lt12 and I just bought a new solendoid for it. I have it wired up just like the book says and when I try to connect the battery it sparcks and starts smoking. If you know how to help me please email me. [email protected]
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Sep 10, 2007, 06:12 PM
    Be sure you are connecting the positive to the positive post. I think you are saying that the wire is smoking at the battery, correct? A spark may be o.k. but not an extreme spark, or arc, but just a small spark is o.k.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snapper 8 horse rider [ 1 Answers ]

I have a briggs 8 horse snapper riding mower that started once after setting for approx. 2 months.I try to start it now and the starter turns over but it does not start.It has a magnetron engine and I have put in a new plug and fresh gas even put gas in the cab and in the spark hold and it just...

Snapper riding mower [ 1 Answers ]

I made the usual error, I left gas in my mower over the winter. Then thinking I knew what I was doing I drained the old gas and refilled with fresh gas. BUT, not before I messed with the carb settings on the 8HP tecumseh engine. Now the engine starts but has no power under load. It barely pulls me...

Snapper Mower Repair [ 1 Answers ]

My rear riding snapper mower pull is not working. The string comes all the way out and does not retract. I have taken the top off and using the same spring tried to put back together properly. It seems as though there is no tension to pull the string back in. Please help me to get the tension back!

Snapper engine ID? [ 3 Answers ]

How do I identify which engine I have on my Snapper rear-engine rider? It's a model 30085 that I picked up for $20, and I need to replace a couple of things, but need to know what engine I have. Thanks for the help!

View more questions Search