Ask Experts Questions for FREE Help !
Ask
    bigbaer's Avatar
    bigbaer Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 30, 2006, 12:18 PM
    Snapper engine ID?
    How do I identify which engine I have on my Snapper rear-engine rider? It's a model 30085 that I picked up for $20, and I need to replace a couple of things, but need to know what engine I have. Thanks for the help!
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Jun 30, 2006, 08:26 PM
    There should be numbers either stamped into the engine shroud, or a plate riveted on the engine shroud.
    bigbaer's Avatar
    bigbaer Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 30, 2006, 08:30 PM
    I think that's part of the problem... it looks like an aftermarket shroud. There are no markings on it, and it looks newer than the rest of the engine. I can't find any markings anywhere else, either.
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #4

    Jul 1, 2006, 06:51 PM
    They don't sell aftermarket shrouds... Since most are stamped right onto the shroud... they can get painted over and become hard to read, or rusted over.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snapper Tractor won't turn left... [ 6 Answers ]

I was wondering if anyone had a picture of the steering linkage of a front engine Snapper Tractor Model #LT14H331KV. Just started mowing today and the silly thing quit turning left. The steering wheel when turned left seems to hop in place instead of catching to turn the wheels left and I can't...

How to replace starter rope on snapper weedeater [ 1 Answers ]

I have a Snapper weedeater model #S31sngbc could someone tell me how to replace the starter rope I have most every thing apart but there is still a housing around the pully!!

Rear engine snapper stopped moving [ 1 Answers ]

Hi, I have a 14 hp snapper rear engine ride on mower, model 331415BVE, that stopped moving while I was cutting the lawn. The engine runs fine. With the engine in any forward or reverse speed the drive disc engages the clutch disc and disengages while in neutral. When I manually turn the clutch...

1994 Civic - Check Engine "Orange" lamp and Engine revs when idling [ 1 Answers ]

Two questions realting to my Honda Civic ESI - 1994 model. 1) When I turn on the ignition key there is a Check Engine lamp displayed in Orange which is remaining On for progressively longer. Car not be started until this light disappears. Eventually after 3-5 seconds light turns off and engine...

View more questions Search