 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Troy Bilt Model 569 Self-Starter won't start
I have a Troy Bilt Model 569 self-propelled, self-starting walk-behind mower that is about 4 yrs old (out of warranty). It will no longer start under the "Self-Start" feature -- which uses a wound spring energizer to start. I know that the self-starter is getting "energized" (as they call it), because when I try to start the mower by pushing forward on the orange thumb lever and pulling the safety bar rearward, I can hear it de-energize. But it no longer start the mower. I now have to use the rope to start the mower each time.
Anyone have similar problems and found a solution with this mower? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Does any one know how to properly replace a drive belt on a Troy Bilt Pony model # 13AN779G766 The trouble I am having is getting the belt on the pulley that is attached to the rear diff. anyone's help would be good. Thank you
I started my troy bilt 21" self propelled lawn mower and pushed it about 50'. After that I stopped and lowered the wheeles so I could cut the grass lower. When I went to start it up again it started but died immeditly. I tired to start it again but it would not start. I let it sit for about and...
When I push the pedal down to go forward, the mower does not go. My father gave us this mower and we have no manual to go by. We know that the belt was replaced, but we do not know that it was replaced correctly. Can you help us?
I just picked up a use 22" Troy Bilt self propelled mower & wanted to know the following: How old is it? Date of Mfg: RPAB When you start it, I can't get the mower blade to dis-engage? They thought it was a commercial grade mower, but I'm not able to tell anything about it. Does...
View more questions Search
|
