Ask Experts Questions for FREE Help !
Ask
    joepajer's Avatar
    joepajer Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 4, 2008, 08:08 AM
    Troy Built Trimmer
    How do I string a troy built trimmer spool?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    May 5, 2008, 10:16 AM
    Remove the trimmer spool from the head, open it up, remove any remnants of old line, use about 15 to 18 feet of line, divide in half, Do Not cut in half, leave one end about 4 inches longer. Then wind the direction indicated on the spool.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy built leaking gas into oil [ 2 Answers ]

Troy built riding mower leaks all the gas fron tank into oil while the mower is not being used

Troy built issues [ 1 Answers ]

I have a troy built riding lawn mower and I got it out for the first time this season. Ran fine, no problems. Someone decided it needed an oil change so that was done. After that and after it ran for a bit, it stopped moving forward and backward. More oil was added, then smoked to death (naturally...

Troy Built Horse [ 1 Answers ]

Blade engage goes off after 3or4 seconds. I must turn off and start again, 3or4 seconds goes off again.

Troy built fuses [ 1 Answers ]

I think I need to change the fuses on my troy built mower/tractor. How do I check to see if they need to be changed? How do I change them? How do I know what fuses to buy?

View more questions Search