Ask Experts Questions for FREE Help !
Ask
    belluomini's Avatar
    belluomini Posts: 2, Reputation: 1
    New Member
     
    #1

    Apr 23, 2008, 02:55 AM
    WHAT WOULD BE The best size AWG to use for an 80 and 100 amp service
    This in reference to a regular size commercial run
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Apr 23, 2008, 04:43 AM
    For a commercial job your electrician can tell you what size he is going to run. ;)
    wcoyle's Avatar
    wcoyle Posts: 5, Reputation: 1
    New Member
     
    #3

    Apr 24, 2008, 06:59 PM
    Check the NEC. #4 for 80 amps, #2 for 100 amps

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Service Cable size/characteristics [ 1 Answers ]

Wish to run 100 amp service from a sub panel on the outside of my home to a pier where will have sub panel at end of pier. Also need to run 60 amp to another outside location. Cables will be buried. What type/size cable should be used.

Service entrance wire size. [ 8 Answers ]

I am in Honduras, where, the NEC does not apply, and what a mess we have without it.. I can put any size wire anywhere, and no one cares, except me. I am putting in a 150 Amp Service and the breaker panel will be about 50 Ft from the Meter.. I have not yet figured the size wire I need to the...

Service conductor wire size [ 1 Answers ]

I am wiring a two-unit apartment that previously had fuse boxes for services. I am installing a two meter box outside to supply separate 200-amp rated main circuit breaker panels, one for each apartment. The calculated load for one apartment is about 102 amps, the other about 132 amps. What minimum...

Electrical service size [ 3 Answers ]

I'm ready to install electric boilers in my shop that has not been wired yet. The boilers require 80/80 and 60/30 amps according to manufacturer literature. Does this mean that I need 250 amps plus normal lights/welder/compressor draws? Like 350amp service? Does the service have to be able to...

What size wire to use for new service? [ 2 Answers ]

We are currently building a greenhouse, and I need to run about 240 foot of wire from the pole to the greenhouse breaker box. The greenhouse will have 2- 115/230V fans drawing 6.0 amps each, 3- 1/3hp sump pumps not sure of the amperage yet but will be 115v, LP gas instant hot water heater, 10...


View more questions Search