| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Flush Mount Ceiling Fan
 [ 2 Answers ]
 We are building a house with 9 foot ceilings in some bedrooms. Does anyone have any suggestions for flushmount ceiling fans? I would assume we would need to stay around a foot total, including lamp kit, from ceiling to botton of unit. Any suggestions are appreciated. 
Bryant ceiling mount furnace
 [ 2 Answers ]
 :confused: thank you but I think you misunderstood,the fan(blower) remains on entire time.the fire(burners) are turning on and off in a matter of minutes,approximately 3 min. cycles. Is there a switch like the blower switch for the flame? Or is this stemming from the regulator somehow. I know the... 
Bryant ceiling mount furnace
 [ 1 Answers ]
 :confused: thank you for your quick response, upon receiving your reply I was a bit more bewildered. I went to run it through a cycle and watched entirety.I am under the impression the fan is working properly(may be kicking on a bit early)the new problem I noticed is the burners run initially for... 
Bryant ceiling mount furnace
 [ 1 Answers ]
 :confused: hello, I recently bought a used bryant ceiling mount furnace model#125-341,not sure of man. Date but guessing older vintage. I went through completely and cleaned thoroughly,mounted and fired it up. Pilot stays lit fine,fan kicks on right away?before the burners ignite. Am getting nice... View more questions Search 
 |