Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What do use for threaded cpvc to steel
[ 2 Answers ]
A threaded cpvc coupler leads into a threaded steel reducer which in turn leads the hot water (irrelevant) but I have been using teflon tape to wrap around the cpvc's threaded male end to go into the receiving end of the threaded steal reducer.
CPVC against PPR pipes?
[ 2 Answers ]
How would PPR and CPVC compare in terms of price, operating pressure, collapse pressure, and fire rating? From the meter to the house, is there a need for CPVC/PPR or would normal u-PVC do?
Copper to cpvc threaded connections
[ 2 Answers ]
Hi, Can I connect cpvc threaded pipe adapters directly to corresponding male or female threaded copper adapters, and, using suitable pipe dope, get good reliable joints? I know there are threaded copper-to-glue cpvc conversion connectors available, but I have on hand a number of copper and cpvc...
Male Brass to Female CPVC Threaded Connections
[ 9 Answers ]
Hello all, I have been coming to this site for quite a while and this is the first time I have signed up and posted... My questions is in regards to a bathroom I am remodeling... The shower valves are Danze and I have a main shower valve and a 4-port diverter valve that goes to a rain...
CPVC threaded coupling to Brass nipple is leaking
[ 5 Answers ]
I just installed a new sink in my garage using CPVC for the plumbing run. Never used CPVC before. Where I came through the wall, I used a CPVC female threaded fitting with ears on it to fasten to the wall stud. I then screwed a 4" brass nipple to it with teflon tape and attached the valve to the... View more questions Search
|