Ask Experts Questions for FREE Help !
Ask
    svfd1214's Avatar
    svfd1214 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2007, 12:11 PM
    Kenmore HE3 Dryer
    I have had the dryer for about 3 years. When you try to dry clothes as soon as it gets hot it will shut off. I have taken the front off and cleaned it out. However I did not find enough that should cause a problem. :confused:
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 5, 2007, 02:57 PM
    You would have to take a meter or Wiggy and test across thermal protectors, if it shows voltage across, it it open. May be opening to low of heat(faulty)
    The vent needs to be clear also.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore HE3 Dryer [ 4 Answers ]

Dryer is getting electricity because the lights come on when a drying selection is pushed. The drum will not turn. When I press the start button, I hear a clicking sound and nothing happens after that! What's up with this?

Kenmore Dryer Elite HE3 [ 1 Answers ]

Opened the door before cycle finished. Will not stop beeping. How do I reset or turn off the beeping?

Kenmore He3 Dryer doesn't heat [ 3 Answers ]

Our dryer doesn't heat. We are thinking it is either the element, thermal fuse, or thermostat. Regardless of the part, how do you get at them to replace. We have gotten into the machine through the front kick plate and have cleaned out everything within reach from the front kick plate and the...

View more questions Search