Ask Experts Questions for FREE Help !
Ask
    brianaiello's Avatar
    brianaiello Posts: 2, Reputation: 2
    New Member
    		  
    #1

    May 28, 2007, 06:46 PM
    Kenmore Washer repair
    Dear Help Desk,

    I've got a Kenmore Series 80 Washer, model #92588210. Everything works fine except the spiral-shaped "tower" in the center of the drum. It does not turn, and consequently does not pull down the clothes. The agitator at the base of the "tower" works fine, though.

    My main question is how to remove the center piece. I don't know if it is a gear that is stripped or what, but I'd like to replace it.

    Thanks very much,

    Brian
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    May 29, 2007, 05:53 AM
    The dawgs are wore out. Remove the fabirc softner dispenser and there will be a cap under that. Remove the cap and you will find a bolt to remove then the whole agitator will pull out.
    brianaiello's Avatar
    brianaiello Posts: 2, Reputation: 2
    New Member
    		  
    #3

    May 29, 2007, 09:01 AM
    Quote Originally Posted by esquire1
    The dawgs are wore out. Remove the fabirc softner dispenser and there will be a cap under that. remove the cap and you will find a bolt to remove then the whole agitator will pull out.

    Perfect! I pulled out the cap, and yes, there were all the broken pieces of the dawgs. It was an easy repair thanks to your advice.
    Thanks so much!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer Repair [ 4 Answers ]

I have a dryer that was working fine until I opened the door to check on the load and when I pressed the start button again it wouldn't start back up. What seems to be the problem and how can I repair this myself. When I press the start button, I can here a slight buzz noise and I smelled...

Kenmore washer [ 1 Answers ]

Recently my washer stop agitating and spinning (Kenmore 110.92588210). It will fill and drain only. I replaced all broken dog cams and still no agitate or spin. What else would cause it not to work? :confused: And is this model a belt drive or direct drive?:confused: Any help would be...

Kenmore washer dryer combo 110-92966-102,washer agitates for a little then it stops. [ 0 Answers ]

Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...

View more questions Search