 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore washer
Recently my washer stop agitating and spinning (Kenmore 110.92588210). It will fill and drain only. I replaced all broken dog cams and still no agitate or spin. What else would cause it not to work? :confused: And is this model a belt drive or direct drive?:confused:
Any help would be greatly appreciated:D |
||||
|
||||
|
how to access a direct drive washer, pump repair, motor repair, replacing the motor coupler, intalling the cabinate, removing the cabinate, Whirlpool, Inlgis, Kenmore, washers
Here is a link to replace the motor coupler it's the motor couplerthat has broken on your washer |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Why is my kenmore washer agitator (the top part) not working?
Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...
My kenmore washer makes a clicking noise when it goes into spin cycle. What is causing this?
We have drain problems with our Kenmore washing machine. It's a basic 2 cycle washing machine. Because of the elevation of our septic system the builders had to have the washer drain first into a pump tank which then pumps it up and into the exit drain for our septic system. Anytime that the...
View more questions Search
|
